40KA DC Surge Protector for Solar System Surge Protection
Product Description
Product Detail
The 40KA DC Surge Protector for Solar System Surge Protection specially designed to protect solar energy systems from surges and transient voltage spikes on the DC (direct current) side. It helps protect solar panels, inverters, charge controllers and other DC equipment from potential damage caused by electrical interference. Certifications such as UL 1449 or IEC 61643 ensure that the device has been rigorously tested and meets the necessary protection requirements. DC surge protectors have a limited lifespan because they absorb and dissipate energy during a surge event. Regular maintenance and regular inspections are recommended to ensure the effectiveness of the equipment.
Introduction of 40KA DC Surge Protector for Solar System Surge Protection :
The JUER Electric® 40kA DC Surge Protector for Solar System Protection is also know as surge protector or SPD in short.
Certificated of 40KA DC Surge Protector for Solar System Surge Protection :
Ebasee Offering over 30 kinds of SPD products which has CE, RoHS,TUV certification.The company pass the approval of ISO9001 already.
Parameters of 40KA DC Surge Protector for Solar System Surge Protection:
| Standard | IEC61643-11 |
| Poles | 1P, 2P, 3P, 4P |
| Max. continuous operation AC voltage Uc | 140, 275, 320, 385, 400, 420, 440V |
| Rated release current | 5, 10, 15, 20, kA |
| System voltage Un | 230/400V AC 50/60Hz |
| Norminal discharge current (8/20μs) In | 20kA |
| Maximum discharge current (8/20μs) Imax | 40kA |
| Voltage protection level (L-N) Up | 1.5kV |
| Response time (L-N) tA | 25ns |
| Mounting | 36mm Standard Guide |
| Cross section of wire (Min.) | 4mm2 |
| Cross section of wire (Max.) | 35mm2 |